MECTRON Starlight Pro

A cordless LED curing lamp for flexible use that can be taken from one room to the other. Thanks to its high performance level and the long-lasting lithium-ion battery, it will run for 320 cycles of 10 seconds each in succession and recharging takes only 120 minutes. Its output can be checked thanks to the built-in radiometer. starlight pro can be relied on to harden a 2-mm thick layer in only 10 seconds and is extremely light (only 105 g). It provides a choice between two operating modes: “Fast-Curing” and “Slow Rise” (soft start).

TECHNICAL ADVANTAGES

Optical Fibre
Sterilizable, coherent, fibre optics conductor, Ø 8 mm

Click-Clack Connection
Exclusive connection in metal ensures an optimal light beam transmission

Optical Protection
Sterilizable, simple to apply to the optical fibre

Low Temperature
It does not require a fan as it develops no heat – silent

Hygiene
The smooth, continuous and compact surface enables perfect disinfection

Processor Control
Constant light power regardless the charge level

Low Battery Warning
The double acoustic signal is activated when the battery is still sufficient for 6 cycles

Accumulator
Lithium-ion battery with no memory effect

Charging Time
Only 90 minutes

Charging Station

  • green control LEDs indicating mains supply and signalling consent for charging process and power output
  • in case of problems a yellow LED will flash

Radiometer

  • integrated radiometer which checks the power output
  • result indicated by a LED

Capacity
320 cycles with 10 seconds

previous arrow
next arrow
previous arrownext arrow
Slider