Features
- Strong adhesion to dentin, metal, Zirconia, composite and etched (or silanated) ceramic. No pre-treatment required in most case. To cement etched ceramic veneers, Maryland bridges and posts, the tooth structures must be etched and the use of Healbond MP in conjunction with InnoCem is strongly recommended.
- Highest conversion rate on the market: 58,40% at 30mn: less primary toxicity.
- HEMA, TEDGMA, Bis GMA and BPA-free : less secondary toxicity.
- High flexural strength: 90MPa.
- After 5 seconds of polymerisation, the excesses remain slightly rubbery to be easily removed.
- Due to its strong hiding power, associated to an extreme opacity, the opaque versions of InnoCem are the best choices for cementation of aesthetic prosthetics elements on implant abutments, or on metallic elements such as inlay core and amalgams.
- Good balance between hydrophobia for a long-term and stable adhesion, and a slight hydrophilia before polymerization to allow InnoCem to chemically bond to collagenfibers and phosphate ions, when used on vital teeth.
- Waterproof and stability over time: no post-operative sensitivities.
- Very thin layer of cement.
- Easy to handle: dual syringe for a perfect dosage and intra-oral fineor xfine tips to facilitate the placement inside the mouth in the intrados of prosthesis or directly into the root canal.
Indications
- Metal, composite, etched (or silanisated ceramic) inlays, onlays, crowns and bridges.
- In conjunction with Healbond MP: Maryland bridges of 2 to 3 elements, Etched (or silanisated) ceramic veneers, Root canal post (metallic or fiber posts).
Important Notice
In case of low abutment teeth an etching prior to cementation will improve the adhesive strength of InnoCem
| References & Presentations (REFILLS) | |
|---|---|
| IC-10-TA2 | 1 x 5 ml syringe + 10 mixing tips + 10 intraoral tips (fine and Xfine). Translucent A2 shade |
| IC-10-OA2 | 1 x 5 ml syringe + 10 mixing tips + 10 intraoral tips (fine and Xfine). A2 Opaque shade |
| IC-10-OA3 | 1 x 5 ml syringe + 10 mixing tips + 10 intraoral tips (fine and Xfine). A3 opaque shade |
Shear bond strength*
Conversion rates*
*Tests conducted by G-Pharma. according to the norms: Flexural Strength according to ISO 4049 and carried out with a Zwick equipment. The Degree of conversion was evaluated using FTIR spectrometer with an attenuated total reflectance (ATR) accessory. Shear bond strength according to the norms ISO 11405 and carried out with a Zwick equipment.
| References & Presentations (REFILLS) | |
|---|---|
| IC-10-TA2 | 1 x 5 ml syringe + 10 mixing tips + 10 intraoral tips (fine and Xfine). Translucent A2 shade |
| IC-10-OA2 | 1 x 5 ml syringe + 10 mixing tips + 10 intraoral tips (fine and Xfine). A2 Opaque shade |
| IC-10-OA3 | 1 x 5 ml syringe + 10 mixing tips + 10 intraoral tips (fine and Xfine). A3 opaque shade |
Shear bond strength*
Conversion rates*
*Tests conducted by G-Pharma. according to the norms: Flexural Strength according to ISO 4049 and carried out with a Zwick equipment. The Degree of conversion was evaluated using FTIR spectrometer with an attenuated total reflectance (ATR) accessory. Shear bond strength according to the norms ISO 11405 and carried out with a Zwick equipment.
Dr. Christian Makary was born in Lebanon in 1969. He graduated as a doctor of dental surgery in 1993 from the Saint Joseph University of Beirut in Lebanon. He holds a Certificate of Oral Surgery from Paris VII University, a University Diploma in Oral Implantology from Bordeaux II University and a University Diploma in Oral pathology from Paris VI University in France.