Features
- Translucent shade, for a better vision of the surgical field.
- Resistant but slightly resilient for an easy removal.
- Adequate setting time.
- Low exothermicity.
- A new layer can be applied on top of an existing one and stick to it, to fill the free space between the guide and the “drilled body”.
Indications
- To make surgical guides directly in the mouth (avoid the need to make an impression and a plaster model for this step).
- Stabilization of SICAT plates (Sirona).
- Bite registration when it is unstable.
References & Presentations | |
---|---|
DUCL-50 | 1 x 50ml cartridge +10 mixing tips |
EJ-100 | 100 yellow mixing tips |
Making of a surgical guide directly in mouth in a CADCAM environment

1 – Duroc Clear application

2 – Insertion of the reference body into the resin

3 – Reference body in place

4 – System taking off.

5 – Detection of the reference body

6 – Removing the reference body

7 – Machining of the drill body

9a – Apply the dual self-etching bonding around the drill body …

9b – … and inside the surgical guide

10 – Assembling of the 2 parts of the surgical guide

11 – Trimming and polishing the surgical guide

12 – Surgical guide finished
References & Presentations | |
---|---|
DUCL-50 | 1 x 50ml cartridge +10 mixing tips |
EJ-100 | 100 yellow mixing tips |

1 – Duroc Clear application

2 – Insertion of the reference body into the resin

3 – Reference body in place

4 – System taking off.

5 – Detection of the reference body

6 – Removing the reference body

7 – Machining of the drill body

9a – Apply the dual self-etching bonding around the drill body …

9b – … and inside the surgical guide

10 – Assembling of the 2 parts of the surgical guide

11 – Trimming and polishing the surgical guide

12 – Surgical guide finished